home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Netware Super Library
/
Netware Super Library.iso
/
zipfiles
/
p2z
/
pserv2.exe
/
PSERV2.TXT
next >
Wrap
Text File
|
1993-07-12
|
7KB
|
173 lines
PSERV2.ZIP
The following files are included for this revision:
PSERV2 ZIP 120687 12-18-92 3:36p
PSERVER VAP 65218 06-15-92 2:46p
PSERVER EXE 109116 10-29-92 7:34a
RPRINTER EXE 59756 06-04-92 10:40a
PSERVER NLM 51866 08-12-92 3:07p
PSERV2 TXT (This File)
PSERVER.VAP NetWare 286 v2.15c and above
02/11/91 64130
1) This VAP shipped with NetWare 2.2 and 3.11.
07/10/91 64994
1) It fixes a bug that causes the rewind option to return to
the beginning of a document, ignoring the page number
specified by the user. This problem occurs when in text
mode.
2) This VAP also addresses a problem of tabs not working
properly.
3) This VAP contains the auto load feature which allows an
unattended load of the pserver.vap. This auto-load
feature will ONLY be available on a NetWare 2.2 File
Server.
AUTO-LOAD NOTES:
When running this new pserver.vap on a NW 2.2 server the
VAP will prompt you for the Print Server name the first
time the VAP is loaded. From that point on the
pserver.vap will remember the Print Server Name until the
name is cleared.
To CLEAR a Print Server Name the user will simply type:
PSERVER CLEARNAME
at the console prompt on the NW 2.2 File Server. This
will cause the pserver.vap to prompt the user for a Print
Server Name on the next load of the pserver.vap.
06/15/92 65218
1) Version 122.r rev'd to 1.26 and passed testing.
Installation:
1) Make a backup copy of the PSERVER.VAP.
2) Copy the new PSERVER.VAP over the original version.
3) To use the new VAP, reboot the file server.
PSERVER.NLM NetWare v3.11
02/11/91 51208
1) This NLM shipped with NetWare 3.11.
07/10/91 50358
1) It fixes a bug that when printing large graphics
documents with serial and parallel printers. This
problem is created by a special condition which causes
the pointer to override the print buffer. As a result,
garbage characters are printed in the middle of a
document. Once the block of bad data is printed, the
printer resumes printing the document as it should.
2) This NLM also addresses a problem of the rewind function
not working correctly when in text mode.
03/03/92 51302
1) It causes DTR and RTS on the serial port to stay high
once the Print Server comes up.
2) This file also fixes a problem that causes print job
corruption in the form of ascii characters or form feeds.
This corruption is known to occur on PaintJet printers,
but may occur on others as well.
3) This file also allows the user to specify how often the
print server services jobs. Currently, the polling time
default is every 15 seconds. The poll time can now be
set by a load-time parameter using the following syntax:
: LOAD PSERVER <PRINT SERVER NAME> POLL=xx
where xx (1 - 30) equals the number of seconds the queue
waits before checking for jobs to be serviced. If the
POLL parameter is not entered, the default value is used.
If an invalid POLL value or if incorrect syntax is
entered, the user is given the correct syntax and the
range of correct values and the user is then prompted to
hit any key to continue.
08/12/92 51866
1) Version 1.22r rev'd to 1.27 and passed testing.
Installation:
1) Flag PSERVER.NLM as SRW in the SYS:SYSTEM directory
(Sharable Read Write).
2) Rename the existing PSERVER.NLM to PSERVER.OLD for backup
purposes.
3) Copy the new PSERVER.NLM to the SYS:SYSTEM directory.
4) Flag the new PSERVER.NLM to SRO (Sharable Read Only).
5) To use the new NLM, unload and then load pserver.
PSERVER.EXE NetWare 286 v2.15c and above
02/11/91 107928
1) This EXE shipped with NetWare 2.2 and 3.11.
07/10/91 108184
1) It fixes a possible bug that could create data corruption
when printing large graphics documents with serial and
parallel printers. Although this bug has not been seen
with the EXE, it has been known to occur with
PSERVER.NLM. This problem is created by a special
condition which causes the pointer to override the print
buffer. As a result, garbage characters are printed in
the middle of a document. Once the block of bad data is
printed, the printer resumes printing the document as it
should.
2) This EXE also addresses a problem of the rewind function
not working correctly when in text mode. It was also
found that tabs were not working correctly in the
previous release. This issue has been fixed in this EXE.
10/29/92 109116
1) Contains NCP Packet Signing.
Installation:
1) Flag PSERVER.EXE as SRW in the SYS:PUBLIC directory
(Sharable Read Write).
2) Rename the existing PSERVER.EXE to PSERVER.OLD for backup
purposes.
3) Copy the new PSERVER.EXE to the SYS:PUBLIC directory.
4) Flag the new PSERVER.EXE to SRO (Sharable Read Only).
5) To use the new EXE, unload and then load pserver.
RPRINTER.EXE NetWare 2.15c and above
02/06/91 92378
1) This EXE shipped with NetWare 2.2 and 3.11.
06/04/92 59756
1) Version 1.22r rev'd to 1.26 and passed testing.
NOTE: Refer to your Print Server documentation for more
instructions and information on how to install the Print Server and
for further information on features.
*****************************************************************
DISCLAIMER
Novell, Inc. makes no representations or warranties with respect to
any NetWare software, and specifically disclaims any express or
implied warranties of merchantability, title, or fitness for a
particular purpose.
Distribution of any NetWare software is forbidden without the
express written consent of Novell, Inc. Further, Novell reserves
the right to discontinue distribution of any NetWare software.
Novell is not responsible for lost profits or revenue, loss of use
of the software, loss of data, costs of re-creating lost data, the
cost of any substitute equipment or program, or claims by any party
other than you. Novell strongly recommends a backup be made before
any software is installed. Technical support for this software may
be provided at the discretion of Novell.
*****************************************************************